get paid to paste

archlinux no can read internal emmc

U-Boot SPL 2017.01-2 (Jan 18 2017 - 21:24:24)
DRAM: 512 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1

U-Boot 2017.01-2 (Jan 18 2017 - 21:24:24 -0700) Arch Linux ARM

CPU:   Allwinner A13 (SUN5I)
Model: Olimex A13-Olinuxino
I2C:   ready
DRAM:  512 MiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

Setting up a 1024x768 vga console (overscan 0x0)
In:    serial
Out:   vga
Err:   vga
Net:   No ethernet found.
starting USB...
USB0:   USB EHCI 1.00
USB1:   USB OHCI 1.0
scanning bus 0 for devices... 2 USB Device(s) found
Hit any key to stop autoboot:  2  1  0 
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
725 bytes read in 260 ms (2 KiB/s)
## Executing script at 43100000
5727976 bytes read in 574 ms (9.5 MiB/s)
30978 bytes read in 4661 ms (5.9 KiB/s)
4225001 bytes read in 464 ms (8.7 MiB/s)
## Flattened Device Tree blob at 43000000
   Booting using the fdt blob at 0x43000000
   Loading Ramdisk to 49bf8000, end 49fff7e9 ... OK
   Loading Device Tree to 49bed000, end 49bf7901 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.10.8-1-ARCH (builduser@leming) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP Sat Apr 1 11:17:20 MDT 2017
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt:Machine model: Olimex A13-Olinuxino
[    0.000000] cma: Reserved 48 MiB at 0x5c800000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] percpu: Embedded 14 pages/cpu @df83c000 s27340 r8192 d21812 u57344
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129158
[    0.000000] Kernel command line: console=ttyS0,115200 root=PARTUUID=46d44c64-01 rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 443280K/521216K available (11264K kernel code, 955K rwdata, 4424K rodata, 1024K init, 968K bss, 28784K reserved, 49152K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xe0000000 - 0xff800000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdfd00000   ( 509 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0c00000   (12256 kB)
[    0.000000]       .init : 0xc1100000 - 0xc1200000   (1024 kB)
[    0.000000]       .data : 0xc1200000 - 0xc12eef98   ( 956 kB)
[    0.000000]        .bss : 0xc12f0000 - 0xc13e2388   ( 969 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000025] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000052] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000412] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
[    0.001080] Console: colour dummy device 80x30
[    0.001117] Calibrating delay loop... 1001.47 BogoMIPS (lpj=2002944)
[    0.048108] pid_max: default: 32768 minimum: 301
[    0.048347] Security Framework initialized
[    0.048543] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.048553] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.049458] CPU: Testing write buffer coherency: ok
[    0.049900] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.050313] Setting up static identity map for 0x40100000 - 0x40100098
[    0.052798] smp: Bringing up secondary CPUs ...
[    0.052818] smp: Brought up 1 node, 1 CPU
[    0.052827] SMP: Total of 1 processors activated (1001.47 BogoMIPS).
[    0.052834] CPU: All CPU(s) started in SVC mode.
[    0.054408] devtmpfs: initialized
[    0.063073] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.063505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.063529] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.067001] xor: measuring software checksum speed
[    0.104103]    arm4regs  :  1238.000 MB/sec
[    0.144094]    8regs     :  1109.000 MB/sec
[    0.184097]    32regs    :  1107.000 MB/sec
[    0.224097]    neon      :  1808.000 MB/sec
[    0.224105] xor: using function: neon (1808.000 MB/sec)
[    0.224298] pinctrl core: initialized pinctrl subsystem
[    0.226114] NET: Registered protocol family 16
[    0.228482] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.230389] cpuidle: using governor menu
[    0.230990] No ATAGs?
[    0.230998] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.231803] Serial: AMBA PL011 UART driver
[    0.316134] raid6: int32x1  gen()   238 MB/s
[    0.384142] raid6: int32x1  xor()   232 MB/s
[    0.452173] raid6: int32x2  gen()   345 MB/s
[    0.520144] raid6: int32x2  xor()   280 MB/s
[    0.588173] raid6: int32x4  gen()   331 MB/s
[    0.656185] raid6: int32x4  xor()   261 MB/s
[    0.724227] raid6: int32x8  gen()   332 MB/s
[    0.792130] raid6: int32x8  xor()   240 MB/s
[    0.860114] raid6: neonx1   gen()  1463 MB/s
[    0.928117] raid6: neonx1   xor()   854 MB/s
[    0.996126] raid6: neonx2   gen()  1937 MB/s
[    1.024101] random: fast init done
[    1.064107] raid6: neonx2   xor()  1219 MB/s
[    1.132133] raid6: neonx4   gen()  1207 MB/s
[    1.200120] raid6: neonx4   xor()   895 MB/s
[    1.268149] raid6: neonx8   gen()   874 MB/s
[    1.336136] raid6: neonx8   xor()   792 MB/s
[    1.336143] raid6: using algorithm neonx2 gen() 1937 MB/s
[    1.336149] raid6: .... xor() 1219 MB/s, rmw enabled
[    1.336156] raid6: using intx1 recovery algorithm
[    1.337785] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
[    1.337832] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
[    1.341378] vgaarb: loaded
[    1.342232] SCSI subsystem initialized
[    1.342861] usbcore: registered new interface driver usbfs
[    1.342938] usbcore: registered new interface driver hub
[    1.343031] usbcore: registered new device driver usb
[    1.343965] Linux cec interface: v0.10
[    1.344015] media: Linux media interface: v0.10
[    1.344060] Linux video capture interface: v2.00
[    1.344228] pps_core: LinuxPPS API ver. 1 registered
[    1.344235] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    1.344258] PTP clock support registered
[    1.344296] EDAC MC: Ver: 3.0.0
[    1.345416] Advanced Linux Sound Architecture Driver Initialized.
[    1.346088] NetLabel: Initializing
[    1.346099] NetLabel:  domain hash size = 128
[    1.346104] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.346179] NetLabel:  unlabeled traffic allowed by default
[    1.346647] clocksource: Switched to clocksource timer
[    1.346866] VFS: Disk quotas dquot_6.6.0
[    1.346948] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.348236] simple-framebuffer 5fd00000.framebuffer: framebuffer at 0x5fd00000, 0x300000 bytes, mapped to 0xe0080000
[    1.348254] simple-framebuffer 5fd00000.framebuffer: format=x8r8g8b8, mode=1024x768x32, linelength=4096
[    1.360577] Console: switching to colour frame buffer device 128x48
[    1.370968] simple-framebuffer 5fd00000.framebuffer: fb0: simplefb registered!
[    1.381346] NET: Registered protocol family 2
[    1.382154] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    1.382202] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    1.382263] TCP: Hash tables configured (established 4096 bind 4096)
[    1.382342] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    1.382363] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    1.382546] NET: Registered protocol family 1
[    1.383153] RPC: Registered named UNIX socket transport module.
[    1.383169] RPC: Registered udp transport module.
[    1.383175] RPC: Registered tcp transport module.
[    1.383181] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.383749] Unpacking initramfs...
[    1.660028] Freeing initrd memory: 4128K
[    1.663445] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    1.669713] zbud: loaded
[    1.673004] NFS: Registering the id_resolver key type
[    1.673052] Key type id_resolver registered
[    1.673059] Key type id_legacy registered
[    1.673076] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.681026] Key type asymmetric registered
[    1.681315] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.681545] io scheduler noop registered
[    1.681556] io scheduler deadline registered
[    1.681772] io scheduler cfq registered (default)
[    1.683691] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_id_detect_pin@0, deferring probe
[    1.688909] sun5i-a13-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
[    1.705433] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[    1.708444] console [ttyS0] disabled
[    1.728590] 1c28400.serial: ttyS0 at MMIO 0x1c28400 (irq = 26, base_baud = 1500000) is a U6_16550A
[    2.515148] console [ttyS0] enabled
[    2.519536] Serial: AMBA driver
[    2.523705] [drm] Initialized
[    2.535561] loop: module loaded
[    2.540222] Loading iSCSI transport class v2.0-870.
[    2.545702] iscsi: registered transport (tcp)
[    2.553634] libphy: Fixed MDIO Bus: probed
[    2.560491] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.567074] ehci-pci: EHCI PCI platform driver
[    2.571591] ehci-platform: EHCI generic platform driver
[    2.577129] ehci-mxc: Freescale On-Chip EHCI Host driver
[    2.582563] ehci-omap: OMAP-EHCI Host Controller driver
[    2.588037] ehci-orion: EHCI orion driver
[    2.592185] ehci-exynos: EHCI EXYNOS driver
[    2.596490] tegra-ehci: Tegra EHCI driver
[    2.600615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.606850] ohci-pci: OHCI PCI platform driver
[    2.611379] ohci-platform: OHCI generic platform driver
[    2.616844] ohci-exynos: OHCI EXYNOS driver
[    2.621196] ohci-omap3: OHCI OMAP3 driver
[    2.625619] usbcore: registered new interface driver uas
[    2.631022] usbcore: registered new interface driver usb-storage
[    2.637077] usbcore: registered new interface driver ums-cypress
[    2.643140] usbcore: registered new interface driver ums_eneub6250
[    2.649367] usbcore: registered new interface driver ums-freecom
[    2.655417] usbcore: registered new interface driver ums-isd200
[    2.661375] usbcore: registered new interface driver ums-usbat
[    2.671594] i2c /dev entries driver
[    2.676876] axp20x-i2c 0-0034: AXP20x variant AXP209 found
[    2.690871] axp20x-regulator axp20x-regulator: regulators node not found
[    2.702140] axp20x-i2c 0-0034: AXP20X driver loaded
[    2.715115] sdhci: Secure Digital Host Controller Interface driver
[    2.721338] sdhci: Copyright(c) Pierre Ossman
[    2.726509] Synopsys Designware Multimedia Card Interface Driver
[    2.733069] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[    2.733694] usbcore: registered new interface driver vub300
[    2.745876] usbcore: registered new interface driver ushc
[    2.752783] sunxi-mmc 1c0f000.mmc: Got CD GPIO
[    2.794920] sunxi-mmc 1c0f000.mmc: base:0xe03ac000 irq:19
[    2.800845] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.811635] ledtrig-cpu: registered to indicate activity on CPUs
[    2.817951] hidraw: raw HID events driver (C) Jiri Kosina
[    2.823835] usbcore: registered new interface driver usbhid
[    2.829466] usbhid: USB HID core driver
[    2.833656] ashmem: initialized
[    2.844811] NET: Registered protocol family 10
[    2.871737] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.884871] Segment Routing with IPv6
[    2.888934] mmc0: new high speed SDHC card at address 0007
[    2.894621] mip6: Mobile IPv6
[    2.897729] NET: Registered protocol family 17
[    2.903267] Key type dns_resolver registered
[    2.907753] ThumbEE CPU extension supported.
[    2.912140] mmcblk0: mmc0:0007 SD8GB 7.42 GiB 
[    2.917435] Registering SWP/SWPB emulation handler
[    2.922481]  mmcblk0: p1
[    2.926773] registered taskstats version 1
[    2.931039] zswap: loaded using pool lzo/zbud
[    2.937798] Btrfs loaded, crc32c=crc32c-generic
[    2.951881] ehci-platform 1c14000.usb: EHCI Host Controller
[    2.957567] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
[    2.965617] ehci-platform 1c14000.usb: irq 21, io mem 0x01c14000
[    2.986691] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
[    2.993062] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.999886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.007121] usb usb1: Product: EHCI Host Controller
[    3.012008] usb usb1: Manufacturer: Linux 4.10.8-1-ARCH ehci_hcd
[    3.018018] usb usb1: SerialNumber: 1c14000.usb
[    3.023384] hub 1-0:1.0: USB hub found
[    3.027279] hub 1-0:1.0: 1 port detected
[    3.032916] ohci-platform 1c14400.usb: Generic Platform OHCI controller
[    3.039729] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 2
[    3.047767] ohci-platform 1c14400.usb: irq 22, io mem 0x01c14400
[    3.114893] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.121705] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.128934] usb usb2: Product: Generic Platform OHCI controller
[    3.134865] usb usb2: Manufacturer: Linux 4.10.8-1-ARCH ohci_hcd
[    3.140878] usb usb2: SerialNumber: 1c14400.usb
[    3.146219] hub 2-0:1.0: USB hub found
[    3.150102] hub 2-0:1.0: 1 port detected
[    3.156020] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
[    3.164128] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.169950] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
[    3.178027] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.184840] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.192067] usb usb3: Product: MUSB HDRC host driver
[    3.197038] usb usb3: Manufacturer: Linux 4.10.8-1-ARCH musb-hcd
[    3.203059] usb usb3: SerialNumber: musb-hdrc.1.auto
[    3.208798] hub 3-0:1.0: USB hub found
[    3.212674] hub 3-0:1.0: 1 port detected
[    3.218179] hctosys: unable to open rtc device (rtc0)
[    3.223340] sr_init: No PMIC hook to init smartreflex
[    3.228774] sr_init: platform driver register failed for SR
[    3.234767] vcc3v0: disabling
[    3.237740] vcc5v0: disabling
[    3.240739] usb0-vbus: disabling
[    3.243983] ALSA device list:
[    3.246959]   No soundcards found.
[    3.252332] Freeing unused kernel memory: 1024K
:: running early hook [udev]
Warning: /lib/modules/4.10.8-1-ARCH/modules.devname not found - ignoring
starting version 232
:: running hook [udev]
:: Triggering uevents...
[    3.450782] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    3.616968] usb 1-1: New USB device found, idVendor=0bda, idProduct=8176
[    3.623784] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.630937] usb 1-1: Product: 802.11n WLAN Adapter
[    3.635746] usb 1-1: Manufacturer: Realtek
[    3.639857] usb 1-1: SerialNumber: 00e04c000001
:: performing fsck on '/dev/mmcblk0p1'
/dev/mmcblk0p1: clean, 35152/486720 files, 254653/1945344 blocks
:: mounting '/dev/mmcblk0p1' on real root
[    6.240045] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
:: running cleanup hook [udev]
[    6.735548] systemd[1]: System time before build time, advancing clock.
[    6.814323] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.880593] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    6.899421] systemd[1]: Detected architecture arm.

Welcome to Arch Linux ARM!

[    6.916657] systemd[1]: Set hostname to <alarm>.
[    7.133984] random: crng init done
[    7.527815] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[    7.555249] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[    7.575195] systemd[1]: Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket (/dev/log).
[    7.623069] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[    7.641811] systemd[1]: Created slice System Slice.
[  OK  ] Created slice System Slice.
[    7.660241] systemd[1]: Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[    7.684035] systemd[1]: Starting Create list of required static device nodes for the current kernel...
         Starting Create list of required st…ce nodes for the current kernel...
         Starting Journal Service...
[  OK  ] Created slice system-getty.slice.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on Process Core Dump Socket.
[  OK  ] Started Forward Password Requests to Wall Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
         Mounting Configuration File System...
         Mounting Debug File System...
         Starting Remount Root and Kernel File Systems...
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Listening on Network Service Netlink Socket.
         Starting Apply Kernel Variables...
[  OK  ] Created slice User and Session Slice.
[  OK  ] Reached target Remote File Systems.
         Mounting POSIX Message Queue File System...
[  OK  ] Reached target Slices.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Set up automount Arbitrary Executab…rmats File System Automount Point.
[  OK  ] Reached target Swap.
         Mounting Temporary Directory...
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted Temporary Directory.
[  OK  ] Started Create list of required sta…vice nodes for the current kernel.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Started Apply Kernel Variables.
         Starting udev Coldplug all Devices...
         Starting Load/Save Random Seed...
         Starting Create System Users...
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create System Users.
         Starting Create Static Device Nodes in /dev...
[    9.115488] systemd-journald[156]: Received request to flush runtime journal from PID 1
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Rebuild Dynamic Linker Cache...
         Starting Rebuild Journal Catalog...
         Starting Create Volatile Files and Directories...
[  OK  ] Started Rebuild Journal Catalog.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
         Starting Network Time Synchronization...
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Rebuild Dynamic Linker Cache.
         Starting Update is Completed...
[  OK  ] Started Update is Completed.
[  OK  ] Reached target System Initialization.
[  OK  ] Started Daily verification of password and group files.
[  OK  ] Started Daily man-db cache update.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting SSH Key Generation...
[  OK  ] Started Entropy Harvesting Daemon.
         Starting Login Service...
[  OK  ] Started D-Bus System Message Bus.
[   12.497977] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   12.504752] [drm] No driver support for vblank timestamp query.
         Starting Network Service...
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Reached target Timers.
[  OK  ] Started Login Service.
[  OK  ] Started Network Service.
[  OK  ] Reached target Network.
         Starting Network Name Resolution...
         Starting Permit User Sessions...
[  OK  ] Started Permit User Sessions.
[  OK  ] Started Getty on tty1.
[   13.215361] sun4i-drm display-engine: bound 1e60000.display-backend (ops sun4i_backend_ops [sun4i_backend])
[  OK  ] Started Network Name Resolution.
[   13.467519] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops sun4i_tcon_ops [sun4i_tcon])
[   13.657962] fb: switching to sun4i-drm-fb from simple
[   13.782858] Console: switching to colour dummy device 80x30
[   14.297069] input: 1c22800.lradc as /devices/platform/soc@01c00000/1c22800.lradc/input/input0
[   14.338880] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=1)
[   14.475396] Console: switching to colour frame buffer device 128x48
[   15.223747] sun4i-drm display-engine: fb0:  frame buffer device
[  OK  ] Found device /dev/ttyS0.
[   15.266595] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input1
[  OK  ] Started Serial Getty on ttyS0.
[  OK  ] Reached target Login Prompts.
[   16.598738] rtl8192cu: Chip version 0x10
[  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[   17.312240] rtl8192cu: Board Type 0
[   17.339093] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[   17.354784] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
         Starting Load/Save RF Kill Switch Status...
[   17.503243] usbcore: registered new interface driver rtl8192cu
[  OK  ] Started Load/Save RF Kill Switch Status.

Arch Linux 4.10.8-1-ARCH (ttyS0)

alarm login: root
Password: 
[root@alarm ~]# iwco    lsmod
Module                  Size  Used by
arc4                    1943  2
evdev                  12667  0
rtl8192cu              60903  0
rtl_usb                10054  1 rtl8192cu
rtl8192c_common        41686  1 rtl8192cu
rtlwifi                61334  3 rtl_usb,rtl8192c_common,rtl8192cu
mac80211              422312  3 rtl_usb,rtlwifi,rtl8192cu
cfg80211              258941  2 mac80211,rtlwifi
sun4i_ts                4456  0
axp20x_pek              3651  0
rfkill                 18763  2 cfg80211
sun4i_gpadc             3745  0
sun4i_lradc_keys        3478  0
sunxi_wdt               3769  0
sun4i_drm               9356  0
sun4i_tcon             14395  1 sun4i_drm
sun4i_backend           8642  1 sun4i_drm
dumb_vga_dac            3423  0
uio_pdrv_genirq         3591  0
uio                     9202  1 uio_pdrv_genirq
sch_fq_codel            9096  1
ip_tables              12756  0
x_tables               18255  1 ip_tables
[root@alarm ~]# ls -la /dev/block  
total 0
drwxr-xr-x  2 root root  240 Jan  1  1970 .
drwxr-xr-x 14 root root 3040 Feb  1 01:10 ..
lrwxrwxrwx  1 root root   10 Feb  1 01:10 179:0 -> ../mmcblk0
lrwxrwxrwx  1 root root   12 Feb  1 01:10 179:1 -> ../mmcblk0p1
lrwxrwxrwx  1 root root    8 Feb  1 01:10 7:0 -> ../loop0
lrwxrwxrwx  1 root root    8 Feb  1 01:10 7:1 -> ../loop1
lrwxrwxrwx  1 root root    8 Feb  1 01:10 7:2 -> ../loop2
lrwxrwxrwx  1 root root    8 Feb  1 01:10 7:3 -> ../loop3
lrwxrwxrwx  1 root root    8 Feb  1 01:10 7:4 -> ../loop4
lrwxrwxrwx  1 root root    8 Feb  1 01:10 7:5 -> ../loop5
lrwxrwxrwx  1 root root    8 Feb  1 01:10 7:6 -> ../loop6
lrwxrwxrwx  1 root root    8 Feb  1 01:10 7:7 -> ../loop7
[root@alarm ~]# uname -a
Linux alarm 4.10.8-1-ARCH #1 SMP Sat Apr 1 11:17:20 MDT 2017 armv7l GNU/Linux

Pasted: Apr 4, 2017, 6:11:25 am
Views: 23